BFYHD - MULTI PURPOSE SPRAY-ON ADHESIVE

  • MSDS: BFYHD
  • Manufacturer: CONTACT INDUSTRIES INC
  • Product Name: MULTI PURPOSE SPRAY-ON ADHESIVE
  • National Stock Number: 8040-00-938-6860
Product Identification

Product ID:MULTI PURPOSE SPRAY-ON ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-938-6860
MSDS Number: BFYHD

Responsible Party
CONTACT INDUSTRIES INC

Emergency Phone: (516)822-0715

Cage: OOO76

Contractor
CONTACT INDUSTRIES INC

Telephone: (516)822-0715

Cage: OOO76

Ingredients

METHYLENE CHLORIDE (DICHLOROMETHANE) (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 33%.

OSHA PEL 500 PPM; Z-2

ACGIH TLV: 50 PPM, A2; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 22%.

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

Hazards

Effects of Overexposure:HEADACHE.

First Aid

First Aid:REMOVE TO FRESH AIR OR GIVE OXYGEN. EYE: IMMEDIATELY FLUSH
W/WATER AT LEAST 15 MIN.

Fire Fighting

Flash Point:<80F
Extinguishing Media:CO*2
Fire Fighting Procedures:CONVENTIONAL
Unusual Fire/Explosion Hazard:AVOID CONTACT W/OPEN FLAMES OR HEATED
SURFACES.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING OF VAPORS. USE DRY-RITE OR SPEED DRY ABSORBENT.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F MAINTAIN GOOD
PERSONAL HYGIENE. WASH EXPOSED AREAS THOROUGHLY AFTER USE.
Other Precautions:KEEP OUT OF DIRECT SUNLIGHT.

Exposure Controls

Ventilation:LOCAL-PREVENT VAPOR BUILD UP. MECHAICAL-CROSS VENTILATION.
Protective Gloves:YES
Supplemental Safety and Health
VAPOR PRESS: 60 PSIG. VAPOR DENSITY:HEAVIER THAN AIR. MFG ADDRESS:
CONTACT INDUSTRIES, INC., 850 S. OYSTER BAY RD, HICKSVILLE, NY
11801.

Chemical Properties

Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:22.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES, HEATED SURFACES.

Disposal

Waste Disposal Methods:CONVENTIONAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.